...
Import any audio file into JRiver and click play. Ensure audio is working.
With audio playing, go to Player->DSP Studio->Vividizer to open Vividizer interface.
While audio is playing, click “L” or “R” in the Vividizer interface. This will start playing tuning noise on the left or right speaker respectively. [Note: audio must be playing to allow pink noise to start. The tuning noise will override the audio playing from the selected track.]
...
Adjust the
...
Half-Span Angle to your liking. Choose the angle that fits your audio setup and then select “Done” to save the changes to your Vividizer Angle. [Note: you do not have to use the
...
tuning noise when tuning, you may tune using any audio. However, the
...
tuning noise is the recommended standard audio to tune with.]
Tuning Recommendations: To tune Vividizer simply change the angle until the noise sounds clearly and cleanly outside the speaker, off to your right or left side, and preferably up next to your ear, depending on your setup. If one side is more obvious to you, it is recommended to just tune on that side and go with that angle setting.
...